Some basic settings of gas boiler heating and precautions for maintenance and cleaning:

    Gas wall-hung boiler heating-use need to pay attention to setting the temperature within a reasonable range: the temperature outside in winter is low, the indoor temperature should not be too high, but should be within a comfortable range. If the temperature of the gas wall-hung boiler is set relatively high, not one degree higher, the gas consumption will increase by 6%. The user can set a slightly lower temperature during the day when there is no one, and when there are people at night, the temperature can be increased slightly, but when the human body is in a sleep state, it can be lowered a bit, from 20 degrees to 18 Degree is enough.

       Gas wall-hung boiler heating-no one in the house needs to adjust the valve to the minimum or close for a period of time: when the user lives in a large room with a large number of rooms, a small population, some rooms are unoccupied, or there is no one for a long time The radiator of the gas wall-hung boiler can be adjusted to the lowest position, or it can be turned off directly. This method not only reduces the heating area, but is also very energy-saving. When the temperature is turned on at the minimum, the speed is fast when the temperature is raised again, which can save gas consumption.

     Gas wall-hung boiler heating-clean the gas wall-hung boiler regularly: the gas wall-hung boiler is connected to the radiator for heating. After a period of use, it needs to be cleaned frequently. The surface of the gas wall-hung boiler is easy to clean. Use a clean rag to reduce dust accumulation. For internal users, if users can’t do it by themselves, they can ask professional staff to do this. By cleaning up, the gas wall-hung boiler can work more efficiently, the heating effect is better, and it can save a certain amount of money. Gas loss.

Gas wall-hung boilers are still very convenient to use. After basic understanding, you can use them easily. The only thing you need to pay attention to is to pay attention to safety when using it. Gas wall-hung boilers are still very hot and must be used correctly to avoid burns.

      Gas wall-mounted boiler: Gas wall-mounted boiler is an advanced equipment that integrates water, electricity and gas (fire), and can provide domestic hot water and independent heating. It is convenient to use and not affected by external factors. In recent years, it has been widely used in the domestic market. Due to the characteristics of heat conduction, the actual operating cost of the wall-hung boiler is closely related to the construction. The main influencing factors are the insulation of the house, the thickness of the wall, the insulation material, and the insulation of the windows.

     Product function: The gas wall-hung boiler has a powerful family central heating function, which can meet the heating needs of multi-bedrooms. Each room can be set at a comfortable temperature according to needs, or a room can be turned off separately according to needs, and can provide large flow Constant-temperature sanitary hot water is used for household bathing, kitchen and other places.

     Working principle: When the wall-hung boiler ignition switch enters the working state, the fan first starts to form a negative pressure difference in the combustion chamber, the air pressure switch sends a command to the water pump, after the water pump starts, the water flow switch sends the command to the high-voltage discharger after it is started The command is sent to the gas proportional valve, and the gas proportional valve starts to start. Due to the negative pressure in the combustion chamber, the natural gas does not gather combustion imagination, so there will be no deflagration imagination, achieving quiet ignition and ultra-quiet, and also ensuring dangerous accidents. This standard can identify the stability of the furnace. Some customers worry about gas safety because they don’t understand the operation and control principle of the gas proportional valve of the wall-hung boiler. The gas proportional valve, wind pressure switch and flue gas sensor switch are interlocked control, and the combustion chamber has a certain negative pressure gas proportional valve. Work, when the 5-second flue gas sensor switch does not detect exhaust gas, it will cut off the gas proportional valve to stop the gas supply, so as to ensure the safe use of gas. This is the working principle of traditional wall-hung boilers. In fact, there is also a condensing wall-hung boiler, which is more energy-efficient. The principle of condensing wall-hung boilers is similar to that of standard wall-hung boilers, but the condensing wall-hung boiler has an extra set of heat recovery. System, let’s take a look at the working principle of the condensing wall-hung boiler. The condensing gas wall-hung boiler fully absorbs the sensible heat of the flue gas and the latent heat of water vapor through two heat exchangers. The calorific value of the gas refers to the heat released by the complete combustion of 1Nm3 gas. Calorific value is divided into high calorific value and low calorific value. High calorific value refers to the heat released when 1Nm3 gas is completely burned, and the flue gas is cooled to the original temperature, and the water vapor in it is discharged as condensed water; low calorific value refers to 1Nm3 gas After complete combustion, the flue gas is cooled to the original temperature, but the water vapor in the flue gas is still the heat released when it is in the vapor state. It can be seen that the difference between the high heating value and low heating value of gas is the latent heat of vaporization of water vapor.

     Product advantages: The user creates a system independently, and simultaneously solves the heating and hot water supply problems. The single-family gas wall-hung boiler heating has great adjustment flexibility. The use is completely independent, the heating temperature can be adjusted independently, the heating time can be controlled by itself, the temperature of each room can be controlled freely, there is no heat loss in the boiler room and the external heating network, and the external network is saved. Construction Investment. It conforms to the principle of charging by heat: gas consumption can be accurately measured, and the gas consumption can be controlled by the user to save gas. The heating cycle has low power consumption, saves power, and improves the utilization rate and economic benefits of gas pipelines.

Previous：What are the characteristics of beadin integrated stove? Next：